Quality on the Shop Floor
Quality at every stage
A dedicated QC team across plants — from incoming material to 100% final inspection — backed by an in-house lab and calibrated instruments.
01
Approved requirements
Customer drawings and agreed specifications.
02
Consistent methods
First-piece approval and defined inspection methods.
03
Continuous improvement
Customer feedback and corrective action.
Inspection checkpoints
Four checkpoints, every job
01 Incoming — verify material & certificates
02 First piece — approve before production
03 In-process — fabrication, welding, coating
04 Final — 100% inspection before dispatch
Lab
Metrology & testing
Vision measuring (VMM)Universal testing (UTM)Hardness testerSurface roughness — Ra & RzShore hardness testerDigital height gaugeSLA 3D printer
Finish
Powder coating instruments
Gloss meterColour spectrophotometerColour readerDFT gaugeImpact testerCross-cut adhesion kitConical mandrel testerDelta E meter
Coming soon
Metal power spectrometer
Will verify ferrous metals, zinc alloys, copper & aluminium busbars against material certificates.
When a defect is found
Contain. Analyze. Correct. Verify.
01
Contain
Identify the suspect lot and keep it separate.
02
Analyze
Check why the defect occurred and why it escaped.
03
Correct
Assign an owner; update the method or fixture.
04
Verify
Check subsequent lots before closing the action.
CTQ
Critical to quality areas
| Area | What we check |
|---|---|
| Fabrication | Dimensions, burrs and sharp edges |
| Welding | Fixture alignment, joint fitment and weld quality |
| Coating | Pretreatment, curing, DFT and finish |
| Assembly | Hardware fitment, torque and cabinet function |
Quality you can audit.
Ask us for inspection reports, PPAP documentation or a plant visit.